12
3. Pull the narrower end of the neck plug through the opening of the
neck seal.
4. Stretch the neck seal to fit securely around the neck plug (the end
with the smaller diameter).
Figure 9
Figure 10
5. Fit the cinching strap over the neck seal.
6. Secure the cinching strap by pulling up the excess strap, and
fasten the Velcro closures.
Figure 11
Figure 12
7. Clamp both wrist seals with the clamps provided.
8. Connect the two coiled pneumatic hoses to the output side of the
control box. The two hoses are interchangeable.
Figure 13
Figure 14
