RoadRunner
U S E R S G U I D E
52
Now, continue to press the right arrow button
Ü
until the phone
number is displayed. Each press of the right arrow button
advances to the next paramter. Pressing the left-arrow button
goes back to the previous parameter. Pressing the up arrow
button exits the editor, saving any changes.
Press
ENTER
, enter the new phone number, and press
ENTER
again.
Pressing the up arrow completes the edit and saves the new
information.
Manual Entry of Quick Configuration or Speed Dial
You can also manually add an entry into the Speed Dial table using the
SDSET
<Add entry>
sequence. Follow the prompts, entering all information in sequence.
The
RoadRunner
will return the ID number of the new entry. If you
enter the ‘#’ character as the phone number, the entry will be saved as a
non-dialing Quick Configuration.
EXAMPLE 5 – Manually creating a Speed Dial entry
In this example we will manually create a speed dial entry to broadcast
to two locations using Layer 3, and receive from the second location
using G.722. To illustrate the use of placeholders, we will create this
entry to only dial the second location on line 2. The first location will
dial us on line 1.
SDSET
<Add entry>
ENTER
Enter a name at the ‘Description’ prompt, press
ENTER
Select encoder bit rate
<64>
at the ‘EBR’ prompt, press
ENTER
Select encoder sample rate
<32>
at the ‘ESR’ prompt, press
ENTER
Select encoder algorithm
<MPEGL3>
at the ‘EAL’ prompt, press
ENTER
Select
<Mono>
at the ‘EAM’ prompt, press
ENTER.
Note: select
MONO for MPEG algorithms, select ‘M1’ for G.722
