RoadRunner
U S E R S G U I D E
44
If you do not know the ID number, you can scroll through the directory
pressing the
SDSET
key and selecting the
<View Dir>
option. Use the
arrow keys to view the directory. Once the desired entry is found,
press the
ENTER
key once to view the settings and
twice
to execute the
configuration.
Please note that your
RoadRunner
comes pre-programmed with
MUSICAM USA’s 24-hour Music Line numbers. Speed Dial entries 45
through 48 will automatically dial into our Music Line if your
RoadRunner
is equipped with an internal terminal adapter and is
connected to an active ISDN line. The Music Line numbers are
programmed for North American use, with no PBX or access codes. For
testing outside North America, or when connecting through a PBX
system, the numbers will have to be edited.
EXAMPLE 3 – SETUP USING QUICK CONFIGURATIONS
In this example, we will be connecting to a codec not made by
MUSICAM USA, bit we want to get the best possible audio quality. We
have chosen to use MUSICAM enhanced MPEG Layer 2 at 128 kb/s, 48
kHz sampling. Since we will be connecting to another manufacturers
codec, we need to set the decoder to independent ‘YES’.
From the Quick Configuration table, we see that pre-programmed
Quick Configuration 19 meets all parameters. Thus, all we need to do
to configure the RoadRunner is to load Quick Configuration 19:
SDIAL 1 9 ENTER
Receiving Calls
If the far-end user will be calling you, you do not need to do anything
other than configure for the proper algorithm settings. Your
RoadRunner
comes set from the factory to answer all calls. You can
disable this feature using the
<Maint><Dig I/F><Auto Ans>
command sequence or the CAA remote control command.
!
note:
