Musicam FieldFone II, User Manual

Page: 13 / 29

F I E L D F O N E I I U S E R S G U I D E
10 10
Configuration and Programming
Menu Navigation using the Keypad and Display
All FieldFone II functions can be
accessed using the soft-touch keypad
and LCD display.
The following discussion of menu
navigation is based on the basic
keypad and display as shown in
this figure. The top line of the
display is for information and
prompts. The bottom line is for
menu choice selection and
information entry.
To use the keypad and display, press the arrow keys to move the cursor
(the [ ] brackets) to the desired menu selection, and then press the
ENTER
key to execute the selection or move down to the next menu
level. Pressing the
é
(up arrow) at any time brings you up one
menu level. At any given time, only a limited number of selections
may be visible on the display. By using the
ç
and
è
(left and
right) arrow keys, the display can be scrolled to show all possible
options and selections.
The alphanumeric portion of the keypad is used for entering
information and for dialing. Each of the 12 keys associated with the
alphanumeric portion of the keypad represent up to four different
characters. Different characters are selected by multiple presses on the
same key. Please note, the QZ1 key is also used as the space key. The
left and right arrow keys are used in conjunction with the alphanumeric
keys to move the cursor to the desired position. After the desired
character string has been formed, pressing the
ENTER
key executes or
enters the string.
In the discussions that follow, the printed sequence
<X><Y><Z> will be used as shorthand to mean: Use the
arrow keys to move the cursor to ‘X’ and press
ENTER
,
then
use the arrow keys to scroll to ‘Y’ and press
ENTER
, finally,
scroll to ‘Z’ and press
ENTER
.
!