- 5 -
bt35d1ea
3
INTRODUCTION
The
Tradestig 150 / Tradestig 220
is a TIG welding power source, which can also
be used for MMA welding. It can be used direct current (DC).
MUREX's accessories for the product can be found on page
38
.
Equipment
The power source is supplied with a 3 m welding cable, 3 m return cable, 3 m mains
cable, instruction manual for power source and control panel.
Control panels
Tradestig 150
Tradestig 220
When mains power is supplied the unit runs a self diagnosis of the
LEDs and the display, the program version is displayed and in this
example the program version is 0.18.
The manual describes the use of Tradestig 150 and Tradestig 220
control panel on
page 9.
For general information about operation and connection, see page 8
4
TECHNICAL DATA
Tradestig 150
Tradestig 220
Mains voltage
230V,
$
10%, 1
50/60 Hz
230V,
$
10%, 1
50/60 Hz
Mains supply
Z
max
0.35 ohm
Z
max
0.31 ohm
Primary current
I
max
TIG
I
max
MMA
14 A
22 A
24 A
25 A
No-load power
demand when in the energy-saving
mode,
6.5 min. after welding
30 W
30 W
Setting range
TIG
MMA
3 - 150 A
4 - 150 A
3 - 220 A
4 - 170 A
GB
Summary of Contents for Tradestig 150
