Murex Tradestig 150, Instruction Manual And Spare Parts List

Page: 10 / 40

- 10 -
bt35d2ea
7.1 Tradestig 150
Knob for setting data (current (A), time (s) or material thickness (mm/inch))
Display
Choice of welding method TIG or MMA
Choice of selection of HF start or LiftArc
t
start
Choice of 2-stroke or 4-stroke
Display of VRD function ( reduced open-circuit voltage ) is active or inactive.
.
Indication of which parameter is shown in the display, current (A), time (s) or
material thickness (mm/inch)
Choise for selection of setting parameter,
material thickness , slope down or gas post flow .
Note! The pushbutton is also used for hidden functions, see on page 16.
GB