Murex Tradestig 150, Instruction Manual And Spare Parts List

Page: 8 / 40

- 8 -
bt35d1ea
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page
3 . Read through before you start using the equipment!
6.1 PFC - Power factor correction
The Tradestig is 230 V single-phase power sources equipped with a PFC circuit
making it possible to use the full range of the machine on a 16 A fuse. The PFC also
protects the machines against fluctuating mains voltage and makes it safer to use
with a generator. Tradestig can operate with extra long mains cables, over 100 m,
giving you a very larger working radius.
6.2 Connections and control devices
1 Connection (+) for the return cable for
TIG.
MMA: for the return cable or the welding
cable. 7 Mains switch
2 Connection for the remote control unit,
only with Tradestig 220 8 Mains cable
3 Control panel (see separate instruction
manual) 9 Connection for shiedling gas
4 Connection for the TIG-torch
5 Connection for gas to the TIG-torch
6 Connection (-) for the TIG-torch
MMA: return cable or welding cable
6.3 Key to symbols
MMA TIG
GB