Munters MCS300, User Manual

Page: 8 / 28

MCS300
3 Installation
3.1 General
The MCS300 is intended for indoor installation. The unit shall be placed in an upright position on a level
surface. If the unit is stored prior to installation, place it in a roofed area, on a level surface where it is
protected from impact, dust, frost, rain or aggressive contaminants.
3.2 Safety
W W WARNING! ARNING! ARNING!
The unit is not intended for use in classified areas where explosion safety equipment is required.
W W WARNING! ARNING! ARNING!
The unit must not be splashed with, or immersed in water.
W W
WARNING!
ARNING!
ARNING!
Do not cover the unit or obstruct the air vents.
W W
WARNING!
ARNING!
ARNING!
Do not operate the unit if the power plug or cord is damaged.
W W
WARNING!
ARNING!
ARNING!
Never operate the unit when the power cord is in the storage compartment.
W W WARNING! ARNING! ARNING!
The unit must not be connected to a power source other than that specified on its identification plate.
W W WARNING! ARNING! ARNING!
The unit should be connected to an earthed electrical socket.
W W WARNING! ARNING! ARNING!
All electrical equipment connections must be carried out in accordance with local regulations and by qualified
personnel.
W W WARNING! ARNING! ARNING!
Do not operate the unit near any heat-generating devices, or near flammable and hazardous material.
W W WARNING! ARNING! ARNING!
Do not insert fingers or any other objects into the air vents.
W W WARNING! ARNING! ARNING!
Do not try to repair, dismantle or modify the unit.
CA CA CAUTION! UTION! UTION!
Do not sit, stand, or place any objects on the unit.
5
Installation
190TEN-1027- F1404