18
|
© Munters AB, 2018
Fig.16
Using a square tool, make sure to have 90° between the
suspension arm and the bottom flange motor.
5.7 Installation of attachment wires
Fig.17
Fit the attachment wires as shown in Fig.17. In order to
attach the safety hook to the rafter, drill a 12.5 mm
diameter hole through the rafter (drill at a suitable distance
that enables the safety hook to close). The wires will help
to stabilise the Breeze Fan, thus ensuring that minor
vibrations do not cause fatigue failures in the structural
elements or attachment systems. It is important that when
the attachment wires are fitted, the suspension arm does
not deviate from the vertical position (the tension from the
4 wires must be distributed symmetrically around the
centre of the Breeze Fan).
Installation sequence
Fig.18
NOTE
Tighten the wire with a wire strainer, hard by hand, then turn 3 times (Fig.18).
Munters provides an attachment wires kit for the Breeze fan. The attachment wires kit ensure the stability of the Breeze
fan and maintain it at its height if, due to external causes, the fan is abnormally stressed or the ceiling mount with the
suspension arm only does not guarantee a sufficient solidity over time.
Fasten wire with wire lock
Put hook with wire tensioner in eye nut
Fit safety hook in hole in rafter
Fasten wire with wire lock
Eye nut for f. Fix-wire
