12
|
© Munters AB, 2018
5. INSTALLATION
5.1 General
WARNING
Personnel who are responsible for installation, operation, inspection and service must have
appropriate knowledge of the instructions, be familiar with procedures for the prevention of accidents and be
qualified to carry out the work in question. If the personnel do not have the requisite knowledge, instruction of the
personnel must be carried out.
WARNING
Before installing the Breeze Fan it is necessary that a structural engineer verify that the structure
where the fan should be installed is adequate to support the torque generated by the fan when in operation and
the weight of the machine.
The structure on which the fan is to be mounted shall be of stiff construction, shall not present damages, and has to be
capable to support the loads and the structural stress generated by the fan. The verification of the overall stability of the
structure is an exclusive responsibility of the customer and/or the end user.
Munters will not take any liability for any damage which might rise from the use of a support material not adequately chosen
or dimensioned.
The reliability of the unit supplied can only be guaranteed if its use corresponds to the intended use according to the sales
material and/or the order confirmation.
The owner is responsible for the instructions and safety precautions being observed in relation to current legislative
requirements. The manufacturer assumes no responsibility for the Breeze Fan in the event of the incorrect or improper use
of the unit.
NOTE
Read the instruction carefully, before beginning the work.
The Breeze Fan is designed and constructed in accordance with current EN norms for ventilation equipment.
5.2 Tools required for the installation of the Breeze Fan
Ring/open-ended spanner
– 10
Ring/open-ended spanner
– 13
Ring/open-ended spanner - 17
Ring/open-ended spanner - 19
