mundoclima MUPR-09-H11-E, Service Manual

Page: 48 / 149

e Indoor Unit Disassembly 9 f
2.2 Electrical parts (Antistatic gloves must be worn.)
Note: Remove the front panel (refer to 1. Front panel) before disassembling electrical parts.
Procedure Illustration
1) Remove one fixing screw of electrical
control box subassembly. (see CJ_AG_
INV_013).
(If you want to repair the electrical control
box components, perform the first step;If
you want to repair the main control board
assembly, perform steps 2 to 5 below.)
2) Cut the ribbon by a shear, then pull
out the coil temperature sensor (T2)
(see CJ_AG_INV_014).
3) Remove one fixing screw of the
electronic control box and two screws
used for the ground connection (see
CJ_AG_INV_014).
CJ_AG_INV_013
CJ_AG_INV_014
Note: This section is for reference only. Actual unit appearance may vary.
T2 Sensor
Ground Screws
Service manual H11 series