![Multitech RouteFinder RF850 User Manual Download Page 94](http://html1.mh-extra.com/html/multitech/routefinder-rf850/routefinder-rf850_user-manual_1855773094.webp)
Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E)
94
Network Setup > Masquerading
Network Setup > Masquerading
Masquerading is a process which allows a whole network to hide behind one or several addresses preventing
the identification of your network topology from the outside. Masquerading enables the user to enter only one
source network. All services are automatically included in the transition. The translation takes place only if the
packet is sent via the indicated network interface. The address of this interface is used as the new source of the
data packets.
On this screen you can select networks or network groups to be masked to selected network cards.
Masquerading is especially useful for connecting private networks to the Internet. It allows you to hide internal IP
addresses and network information from the outside network.
Masquerading
Masquerading
Select one of the networks already defined in the Networks menu. Select a network from each
box (
f
rom
and
to
networks).
The options are Any, LAN, WANInterface, WAN, DMZ Interface, and DMZ when Load
Balancing is disabled.
The options are Any, LAN, WANLINK1 Interface, WANLINK1, WANLINK2 Interface,
WANLINK2 and when Load Balancing is enabled.
Add
Click the
Add
button. The Masqueraded network route displays below.
Edit or Delete a Route
Select Masqueraded network route from the lower box and click the
Edit
or
Delete
button.
When deleting a Masqueraded network route, the interface adapts accordingly.
Example
In this example, the sent packet does not contain any internal information. The reply to the
request is recognized by the RouteFinder and is passed on to the requesting computer.
Computer A with the address XY is inside a masked network within the RouteFinder.
It starts an HTTP request into the Internet. Computer A - and all computers in this network - use
the only official IP address. For all data packets that are to go into the Internet, the IP address of
the sender is exchanged for the IP address of the external network card.