Chapter 4 – Configuration Examples
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E)
28
Example 1, Side B
Packet Filters > Packet Filter Rules
1.
Go to the
Packet Filters > Packet Filter Rules
screen to set the VPN client tunnel rights. The
Packet Filter rights established on this screen give the client access across the tunnel to your
host network.
2.
In the
System Defined Rules
section, uncheck the
Status
box, if a check mark is present when
adding
User Defined Packet Filters Rules
.
3.
In the
Add User Defined Packet Filter Rules
section, click on
From (Host/Networks)
and select
the network to be allowed.
In this example, select
Remote-LAN
.
4.
If you are not restricting the type of service, select
Any.
5.
If you are not restricting what network. Click on
To (Host/Network)
, select
Any.
Notes:
•
If the client is dynamic (unknown), set up a
Remote-LAN Any Any
ACCEPT
filter to allow any
network to come in.
•
You will need to add
LAN Any Any ACCEPT
to the
User Defined Packet Filter Rules
. If you
want this rule to be in the first position so that it takes precedence over the
VPN-Client
rule,
select the
Move
command, and move this rule to the first position.
VPN Setup
1.
Go to the
VPN > IPSec
screen.
2.
Click the
VPN
Status
check box to enable IPSec. Then click the
Save
button.
3.
Select
Add an IKE Connection
by clicking the corresponding
Add
button.
