manualshive.com logo in svg

Multitech RouteFinder RF850, User Manual

Share
Download
Multitech RouteFinder RF850 User Manual Download Page 126

Chapter 6 – RouteFinder Software  

Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E) 

126 

Wizard Setup

 

Packet Filter Rule 

If this setting is enabled by checking the checkbox, all packets coming from the LAN will be forwarded 
by the firewall. If disabled, none of the packets will go through. 

Modem Settings 

Use this checkbox to enable/disable the modem PPP dial backup feature. If enabled, enter the User 
Name, Password, Serial Port, Baud Rate, Dial Number, and Initialization Strings for the backup port. 

Password Settings 

Use this section to change the password for the root user, WebAdmin User, and the SSH User (login 
user). 
It is highly recommended that you change passwords.  

Save or Cancel 

When all of the parameters are set, click the 

Save

 button to activate them. Your RouteFinder is now 

configured. 

Summary of Contents for RouteFinder RF850



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands