Multitech CC1600 Series, Owner'S Manual

Page: 42 / 76

42
MT2834BLR Owner’s Manual
4.1.1 Callback Security Commands
COMMAND: #DBn
VALUES: n= 0, 1, or 2
DEFAULT: DB0
DESCRIPTION: #DB0 disables Callback Security and answering Yes to the prompt
turns off Callback Security and erases stored phone numbers and
passwords. Answering No to the prompt aborts the command.
#DB1 activates remote and local password security.
#DB2 activates remote password security.
COMMAND: #CBNyyxxxxxx
VALUES: n/a
DEFAULT: n/a
DESCRIPTION: Callback password with xxxxxx being callback password
and yy being the memory location. Callback password xxxxxx must
start with a non-numeric character and upper/lower case sensitive.
Callback password xxxxxx must be a minimum of 6 and maximum of
10 characters. yy memory locations are from 0 to 29. Must T (tone)
dialing in string.
COMMAND: + - Dxxxxxx???Nxx
VALUES: n/a
DEFAULT: n/a
DESCRIPTION: Callback Phone Numbers xxxxxx with the + preceding the phone
number indicating the callback modem phone number
for the
corresponding password at the same memory location. The (-)
preceding the phone number enables direct entry when the caller
uses the correct password without the callback modem having to
return the call. The ??? entry at the end of the phone number
represents an extension added to the main phone number. The Nxx
is the memory location of the callback phone number and password.
COMMAND: #Pn
VALUES: n= 0, 1, or 2
DEFAULT: #P0
DESCRIPTION: Parity of the prompt messages sent by the callback modem.
#P0 is no parity
#P1 is odd parity
#P2 is even parity
COMMAND: #RCBNxx
VALUES: n/a
DEFAULT: n/a
DESCRIPTION: Erases the callback password stored at memory location xx.
Memory locations are 0 to 29.
COMMAND: #RDNxx
VALUES: n/a
DEFAULT: n/a
DESCRIPTION: Erases the callback phone number stored at memory location xx.
Memory locations are 0 to 29.