Multitech CC1600 Series, Owner'S Manual

Page: 37 / 76

37
Chapter 4 - Modem Commands, S-Registers & Result Codes
COMMAND: #Ln
VALUES: n = 0 thru 3
DEFAULT: #L0
DESCRIPTION: #L0 selects modems negotiate V.42 Mode.
#L1 selects MNP on and LAP-M off.
#L2 selects LAP-M on and MNP off.
#L3 selects no detection phase; go directly to LAP-M mode.
COMMAND: $LLn
VALUES: n = 0 or 1
DEFAULT: $LL0
DESCRIPTION: $LL0 Multi-Tech leased line handshake.
$LL1 V.34 leased line handshake.
COMMAND: $MBn
VALUES: n = speed
DEFAULT: $MB33600 bps
DESCRIPTION: $MB75 selects CCITT V.23 mode.
$MB300 selects 300 bps on-line.
$MB1200 selects 1200 bps on-line.
$MB2400 selects 2400 bps on-line.
$MB4800 selects 4800 bps on-line.
$MB9600 selects 9600 bps on-line.
$MB14400 selects 14400 bps on-line
$MB19200 selects 19200 bps on-line
$MB28800 selects 28800 bps on-line
$MB33600 selects 33600 bps on-line
COMMAND: Nd
VALUES: d = 0 thru 9
DEFAULT: n/a
DESCRIPTION: Dial stored telephone number “d” (Do not include the letter D in this
command.)
COMMAND: NdNe
VALUES: d = 0 thru 9; e = any other number 0 thru 9
DEFAULT: n/a
DESCRIPTION: Number Linking. If first number dialed is busy, another stored
number may be automatically dialed. In example, stored number d is
dialed, and if busy, stored number e is dialed.
COMMAND: O
VALUES: n/a
DEFAULT: n/a
DESCRIPTION: Exit Command Mode and go into On-Line Mode.
COMMAND: P
VALUES: n/a
DEFAULT: Tone Dial
DESCRIPTION: Modem will pulse-dial numbers following the P.