Multitech CC1600 Series, Owner'S Manual

Page: 34 / 76

34
MT2834BLR Owner’s Manual
COMMAND: Ds
VALUES: s = phone #
DEFAULT: n/a
DESCRIPTION: Dial a telephone number “s”, where s may include up to 60 digits or
T, P, R, comma and ; characters.
COMMAND: DsNd
VALUES: s = phone # and d = 0 thru 9
DEFAULT: n/a
DESCRIPTION: Store telephone number. To store, phone number ”s“ is
entered and followed by N and then Directory Number “d.”
COMMAND: &Dn
VALUES: n = 0 thru 3
DEFAULT: &D2
DESCRIPTION: &D0 means DTR is ignored
&D1means modem returns to command mode.
&D2 lets modem react to DTR normally.
&D3 causes modem to reset to modem default parameters.
COMMAND: $Dn
VALUES: n = 0 or 1
DEFAULT: $D0
DESCRIPTION: $D0 disables DTR Dialing.
$D1 enables DTR Dialing.
COMMAND: %DF
VALUES: n = 0 or 1
DEFAULT: %DF0
DESCRIPTION: %DF0 selects V.34 Line Probe Data in Graph Format.
%DF1 selects V.34 Line Probe Data in Table Format.
COMMAND: %DP
VALUES: n = 0 or 1
DEFAULT: %DP0
DESCRIPTION: %DP0 selects do not read Line Probe Information from DSP
during handshaking.
%DP1 selects read Line Probe Information from DSP during
handshaking.
COMMAND: En
VALUES: n = 0 or 1
DEFAULT: E1
DESCRIPTION: E0 selects do not echo Command mode characters.
E1 selects do echo Command mode characters.
COMMAND: $EBn
VALUES: n = 0 or 1
DEFAULT: $EB0
DESCRIPTION: $EB0 enables 10 bit mode.
$EB1 enables 11 bit mode.