![background image](http://html1.mh-extra.com/html/multiquip/ls600p/ls600p_operation-manual_1855382039.webp)
MAYCO LS600P CONCRETE PUMP • OPERATION MANUAL — REV. #1 (09/09/19) — PAGE 39
MAINTENANCE
*
1
Replace engine oil and filter at 100 hours, first time only.
*
2
Add “Supplemental Coolant Additives (SCA’S)” to recharge the engine coolant.
*
3
Replace primary air filter element when restriction indicator shows a vacuum of 625 mm (25 in. H20).
*
4
If blowby hose needs to be replaced, ensure that the slope of the blowby hose is at least a 1/2 inch per foot,
with no sags or dips that could collect moisture and/or oil.
Table 5. Inspection/Maintenance
10 Hrs
DAILY
250 Hrs 500 Hrs
1000
Hrs
OTHER
Engine
Check Engine Fluid Levels
X
Check Air Cleaner
X
Check Battery Acid Level
X
Check Fan Belt Condition
X
Check for Leaks
X
Check for Loosening of Parts
X
Replace Engine Oil and Filter
1
X
Clean Air Filter
X
Check Fuel Filter/Water Separator Bowl
X
Clean Unit, Inside and Outside
X
Change Fuel Filter
X
Clean Radiator and Check Coolant Protection Level
2
X
Replace Air Filter Element
3
X
Check all Hoses and Clamps
4
X
Clean Inside of Fuel Tank
X
Check Battery
X
Visually Check for Oil Leaks
X
Pump
Hydraulic Oil Level
X
Lubrication Box
X
Replace Hydraulic Oil
X
Clean Hydraulic Filters
Grease Shuttle Axle Crank
X
2 Hrs.
Grease Shuttle Cylinder
Monthly
Check System Pressure
X
Check Hardware for Tightness
Weekly
Check Cutting Wear Ring
Weekly
Trailer
Check Brake Lights
X
Check Tire Conditions
X
Inspect Saftey Devices / Decals
X
Check Wheel Bearings
6-Months
Inspect Brake Lining
6-Months
To order go to Discount-Equipment.com