MultiQ 42DS, User Manual

Page: 20 / 28

19 - English
6. Screen Adjustment

FORMAT
Use to change various screen with modes. There are two modes to choose
from: (1) 16:9 (2) 4:3

COLOR TEMP.
Configure the image color. There are three modes to choose from: (1)
NORMAL (2) WARN (3) COOL

H-POSITION
H-Position is used to adjust the horizontal image position manually. Increase
to shift the picture to right, decrease to shift the picture to the left.

V-POSITION
V-Position is used to adjust the vertical image position manually. Increase to
shift the picture to up, decrease to shift the picture down.

CLOCK
Reduce vertical stripes in the screen image.

PHASE
Reduce horizontal stripes in the screen image.

AUTO ADJUST
The
"Auto adjust” is used to perform automatic configuration of the Brightness,
Contrast, Vertical & Horizontal Position, Pixel clock frequency, Video signal
amplification and Tune.
If you are still not satisfied with the picture quality, you could choose
CONTRAST in the OSD Menu and adjust it. You can also manually adjust
PHASE, CLOCK, etc. in the menu.

AUTO COLOR
It is used to adjust the gain and offset of the Red, Green and Blue channels on the ADC
automatically.

OVERSCAN MODE
The original image is proportionally stretched to over the screen. There are two
settings to choose from; (1) ENABLE (2) DISABLE