10 - English
5. Hardware Installation
c). DVI-D signal
Connect one of the signal cable to the DVI input on the rear of the monitor;
and the other end to the DVI connector on the rear of the computer. If the
external device has DVI output only, use a DVI to HDMI adapter cable to
connector to the HDMI terminal. (only support to DVI-D function.)
d). RD232 signal (D-sub 9 pin Cable):
There is one set RS232 signal input (RS232-IN) and output (RS232-OUT)
can be used.
RS232-IN is for RS232 signal input, connect the signal cable on the rear of
the monitor to the 9-pin connector on the rear of the computer.
RS232-OUT is for RS232 signal output, connect the signal cable connector
from this monitor to RS232 input connector of another monitor.
5. Switch on power to the PC system or equipment, then the LCD monitor.
Summary of Contents for 42DS
Page 1: ...42DS 52DS TINSE3245Y1 ...
