MULTILIFT ULTIMA S, Installation Instructions Manual

Page: 11 / 62

Installation
Ultima Hooklift 01/2020
11
3. Installation of Ultima Hooklift
3.1 Safety precautions for the installation work
Before the installation and any welding work is done, make sure that the battery cables of the
truck’s electric system are detached or protected according to the truck manufacturer’s instruc-
tions. Also check other possible protection needed for the electric and electronic systems. The
8-pin connector of the hooklift power supply on the I/O module must be detached before
welding.
To prevent fire, make sure before welding, flame cutting and grinding that sparks can not fly
onto oil or fuel etc. in or around the assembly
The truck cabin must be protected well before any installation work. The cabin must always be
fully tilted (if applicable) up to the mechanical lock before work is carried under it. Check the
truck manufacturer’s instructions for tilting the cabin.
Before lifting the hooklift check the operation and condition of the lifting equipment, the lifting
hooks and wires, ropes or hoisting belts. Check the lifting capacity of the lifting equipment is
adequate to the weight of the hooklift and that lifting can be done safely. See 3.5 Lifting of
hooklift.