Multi-Tech MultiModemISI ISI3334/4, Quick Reference Manual

Page: 36 / 71

ISI3334/4 Hardware/Driver Installation Manual
36
2.4 Result Codes
The MultiModemISI Command mode provides you with several
responses, or
“Result Codes”, that can aid you in Command mode
operation. These Result Codes are displayed on your video monitor.
AT&Q0 selects Multi-Tech responses with Reliable/LAP-M/
Compressed modifiers. The terse result code for
CONNECT 2400 is
9. AT&Q1 selects Standard AT command set responses. The terse
result code for
CONNECT 2400 is 10. The following tables list result
codes generated by the &Q command.
Table 2-2
&Q0 "Multi-Tech" Result Codes
TERSE VERBOSE
0 OK
1 CONNECT
2 RING
3 NO CARRIER
4 ERROR
5* CONNECT 1200
6 NO DIALTONE
7 BUSY
8 NO ANSWER
9* CONNECT 2400
11* CONNECT 4800
12* CONNECT 9600
13* CONNECT 14400
19* CONNECT 19200
21* CONNECT 21600
24* CONNECT 24000
26* CONNECT 26400
28* CONNECT 28800
31* CONNECT 31200
33* CONNECT 33600
* With MNP error correction on, RELIABLE (or R) is added to these result codes.
With LAP-M error correction on, LAP-M (or L) is added to these result codes. With
data compression on, COMPRESSED (or C) is added. (Note these
"Extended"
Result Codes are displayed when your modem is set-up to do so with an X1, X2,
X3, or X4 command.)