Multi-Tech MultiModemISI ISI3334/4, Quick Reference Manual

Page: 29 / 71

Chapter 2 - AT Commands, S-Registers and Result Codes
29
Table 2-1 (cont'd)
Step Procedure
3. Enter your Set-up Password, and if the code is correct the
modem responds with:
OK
You can now use any AT commands of the modem being
remotely configured as if they were being entered locally. You
cannot change the Set-up of the LOGIN Password until you
enter the proper LOGIN Password.
4. When you are done entering AT commands and you want to
exit, type
AT0 and hit RETURN. The modem responds with:
1. DATA Mode
2. COMMAND Mode
5. Enter a 1 to go back on-line with your computer, or enter 2 and
the correct password to talk to your modem.
2.2.2 Password Commands
COMMAND: #Ixxxxxxxxxx
VALUES: n/a
DEFAULT: #IMULTITECH
DESCRIPTION: Login Password is any keyboard characters
(x) (upper/lower case sensitive), minimum 6
and maximum 10 characters. The default
Login Password is #IMULTITECH.
COMMAND: #Syyyyyyyyyy
VALUES: n/a
DEFAULT: #SMODEMSETUP
DESCRIPTION:
Set-up Password is any keyboard
characters (y) (upper/lower case sensitive),
minimum 6 and maximum 10 characters.
The default Set-up Password is
#SMODEMSETUP.