Chapter 2 - AT Commands, S-Registers and Result Codes
19
COMMAND:
In
VALUES:
n = 0,1, 2, 3 or 5
DEFAULT:
Read Only Command
DESCRIPTION:
I0 requests modem ID #.
I1 requests firmware revision #.
I2 for Model of modem.
I3 MTS internal use.
I5 outputs DSP version.
COMMAND:
L
VALUES:
5, 6, 7, 8, 9, 10 and 11
DEFAULT:
Read Only Command
DESCRIPTION:
L5 lists all current operating parameters.
L6 lists all current S-Register values.
L7 lists additional parameters.
L8
lists current on-line diagnostics.
L9 displays Signal Strength Information.
L10
displays Signal to Noise Ratio
Information.
L11 displays Noise Information.
COMMAND:
I9
VALUES:
N/A
DEFAULT:
Read Only Command
DESCRIPTION:
The
I9 command is a query to display this
modem's characteristics when operating
within Windows 95. Entering
ATI9<cr>
invokes
ISI 28800 FAX CT on your video
monitor.
(The response to the query reveals that
this modem is a ISI, 28.8K, FAX and Class
Two capable device.)
Summary of Contents for MultiModemISI ISI3334/4
