Chapter 2 - AT Commands, S-Registers and Result Codes
33
S11
Tone Dialing: Tone Spacing and Duration
Unit:
1 mSec.
Range:
1-255, 80-255*, 80-255***
Default:
70, 80*, 80***
Description:
Sets the time duration of spacing between
tone in tone-dialing.
S13
Remote Configuration Escape Character
Unit:
ASCII Character
Range:
0-127
Default:
37 (
% sign)
Description:
Defines the remote configuration escape
character.
S17
Changing Break Time
Unit:
10 mSec.
Range:
0-2.5 sec
Default:
250
Description:
S17 defines the break time (space) to local
PC.
S24
PBX/CBX Disconnect Drop Time for DSR/CTS/CD
Unit:
50 mSec.
Range:
0-255
Default:
20
Description:
Defines DSR/CTS/CD dropout time. The
default of 20 equals one second.
* Value for International and DOC units
** Value for International units only
***BABT models only
Summary of Contents for MultiModemISI ISI3334/4
