manualshive.com logo in svg

Multenet PocketPAD Power over Ethernet, User Manual, Page: 6 / 80

Share
Download
Multenet PocketPAD Power over Ethernet User Manual Download Page 6

6  

I N T R O D U C T I O N  

6

 

M U LT E N E T     P O C K E T P A D

INTRODUCTION

The PocketPAD is a low cost Serial to Ethernet device server.  This light weight device can 

be used as stand-alone or mounted on a DIN rail.  The PocketPAD connects asynchronous 

serial devices to Ethernet networks.

The  PocketPAD  base  range  has  RS-232  Serial  interfaces  with  a  single  10/100  Base-T 

Ethernet interface.

The 

PocketPAD 1

 has a single Serial interface.

The 

PocketPAD 2

 has two Serial interfaces.

The 

PocketPAD 4

 has four Serial interfaces.

The 

PocketPAD Power over Ethernet

 has a single Serial interface with PoE enabled 10/100 

Base-T Ethernet interface.

The PocketPAD RS 232/422/485 range has a single RS-232/RS-485/RS-422 Serial interface 

with a single 10/100 Base-T Ethernet interface. Internal dip switches are available to configure 

the type of serial line and its termination.

The 

PocketPAD 1 RS 232/422/485

 has a single RS-232/RS-485/RS-422 Serial interface.

The 

PocketPAD 2 RS 232/422/485

 has one RS-232/RS-485/RS-422 Serial interface and 

one RS-232 Serial interface.

The 

PocketPAD 4 RS 232/422/485

 has one RS-232, RS-485, RS-422 Serial interface and 

three RS-232 Serial interfaces.

Summary of Contents for PocketPAD Power over Ethernet

















































































Reviews:

No comments