4 8
C O N F I G U R AT I O N
4 8
M U LT E N E T P O C K E T P A D
Editing a UDP Application
To edit the properties of this application press the number associated with the name (i.e. 1).
Check the “UDP Application Parameters Overview” for parameter explanations.
Reset to Factory Defaults
From the main Configuration menu, select [
Revert to Factory Defaults
]. Confirm your
selection with [
Y
].
Your PocketPAD will reboot with the original settings it was configured with when delivered
from the factory.
DHCP/BootP with TFTP Configuration
The PocketPAD can be configured to use DHCP or BootP to automatically configure the
following settings at the time it boots (either at reboot or power up).
The following can be configured:
• Local IP Address
•
Local Network/Subnet Mask
•
Optional Gateway IP Address
•
Optional DNS
•
Optional Domain Name
•
Optional SMTP server
• TFTP server IP Address
You would configure the BootP server to assign an IP address and Subnet Mask to the
PocketPAD. BootP also allows you to configure extra parameters. DHCP is an adapted form of
BootP.