4 5
C O N F I G U R AT I O N
4 5
M U LT E N E T P O C K E T P A D
Default is 0 (accept any Remote Port connection).
Application Protocol
- Default is Raw.
Raw
-
Data is streamed transparently through
the PocketPAD without any Protocol being
used.
TC500
-
Every message is prepended with a
4-byte header (ASCII Most Significant
Byte first) specifying the length of the
message according to Burroughs TC500
Poll-Select.
Idle Timeout
- Disconnect the TCP connection after it has been idle for a
length of time. TO keep the connection alive, set this value to
0 (default).
Deleting a TCP Application
Press [
D
] to delete a TCP/IP application. Select the number or letter corresponding to the
application name to remove the application.
Editing a TCP Application
To edit the properties of this application press the number associated with the name (i.e. 1).
Note:
An existing application exists (1. Default). This is a Factory Default Setting. You can
edit this application or even delete the application and add a new entry.
Check the “TCP Application Parameters Overview” for parameter explanations.
Remember to Save and Reboot the PocketPAD for the changes to take effect.