8
Tractor-ECU application
Configuring the parameters for a vehicle profile
58
30302710-02-EN
V7.20141016
List of parameters
Cursor
Function
icon
Meaning
Only appears if…
Switch to the "Settings" screen
Input the position of the GPS receiver [
63].
Activate the vehicle profile
The selected vehicle profile is not
activated.
Return
Calibrating the speed sensor
A wheel sensor or radar sensor is used
for speed measurements. The sensor is
connected to the terminal.
Calibrate the working position sensor
A hitch sensor - front or a hitch sensor -
rear is used to measure the working
position. The sensor is connected to the
terminal.
1. Call up the Tractor-ECU application:
| Tractor-ECU
2.
- Call up the list of vehicles.
3. Select the vehicle profile.
4. Modify the required parameters. You can also change the name of the vehicle profile.
Parameters in a vehicle profile
Only those parameters which you can use to configure the hardware version of your terminal are
shown.
When configuring sensors, you will need not only to select which sensor is mounted, but also how
this sensor is connected to the terminal.
Procedure
