Muller Elektronik TRACK Guide II, Installation And Operating Instructions Manual

Page: 5 / 80

Contents
30302710-02-EN V7.20141016 5
8.2.1 Calibrating the speed sensor 61
8.2.2 Configuring a working position sensor 62
8.2.3 Entering the position of the GPS Receiver 63
For machines fitted with an ISOBUS job computer 64
8.3 Activating vehicle profiles 65
9 ISOBUS-TC task processing 66
9.1 Using ISOBUS-TC 66
9.2 Adjusting how you use ISOBUS-TC 66
9.3 Configuring the list of connections 67
10 Serial Interface application 69
10.1 Transfer target rates via LH5000 69
10.2 Switching sections and transferring target rates via ASD 70
11 File Server application 73
12 Maintenance and servicing 74
12.1 Servicing and cleaning the terminal 74
12.2 Disposing of the unit 74
12.3 Instructions on retrofitting 74
12.4 Checking the software version 75
12.5 Technical specifications 75
12.5.1 Technical specifications of the terminal 75
12.5.2 Pin assignment of port A 76
12.5.3 Pin assignment of port B 77
12.5.4 Pin assignment of port C 78
12.5.5 Pin assignment of camera ports 1 and 2 79
13 Notes 80