background image

M

UGNAI N I

®

MUGNAINI SERIES 

GAS FIRED OVEN MANUAL

Mugnaini Imports, Inc. 

11 Hangar Way, Watsonville CA 95076 

888.887.7206  │  831.761.7167  │  Fax:  831.728.5570

 

www.mugnaini.com  │  [email protected]

PAGE 19

11.  LIMITED WARRANTY

MUGNAINI IMPORTS, INC. (“Mugnaini”), a California corporation, is a distributor of Italian wood-

burning residential and commercial ovens (the “Oven(s)”). Mugnaini warrants to the 

original 

purchaser only

 (“Original Purchaser”) that the Oven will be free from defects in materials and 

workmanship for a period of 

five (5) years

 from the date of delivery (“Warranty Period”).

Remedies available to the Original Purchaser against Mugnaini under this warranty are 

limited to: (i) repair and replacement of parts and/or the necessary labor and services 

required to repair the Oven; or, (ii) at Mugnaini’s option, refund of the purchase price.

Information in Mugnaini’s catalog or other information provided by Mugnaini is given after the exercise 

of due care in its compilation, preparation, and issuance; however, Mugnaini disclaims any liability 

resulting from such information, except for the obligation under the warranty provided herein.

NO OTHER EXPRESS WARRANTY IS GIVEN, AND NO AFFIRMATION OF MUGNAINI, BY WORDS OR ACTION, 

SHALL CONSTITUTE AN ADDITIONAL WARRANTY. THIS WARRANTY IS NON-TRANSFERRABLE.

THIS WARRANTY IS EXPRESSLY IN LIEU OF AND EXCLUDES ALL OTHER EXPRESS OR IMPLIED WARRANTIES 

WITH RESPECT TO THE OVEN OR ANY RELATED EQUIPMENT OR ACCESSORY, INCLUDING, BUT NOT 

LIMITED TO, WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR PARTICULAR PURPOSE, USE OR 

APPLICATION AND ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF MUGNAINI, UNLESS SUCH 

OTHER WARRANTIES, OBLIGATIONS OR LIABILITIES ARE EXPRESSLY AGREED TO IN WRITING BY MUGNAINI.

This warranty shall not apply:
(a) to any Oven or related equipment or accessory that is improperly installed or maintained
(b) to products resold in other than Mugnaini original packaging or to 

Ovens modified or altered by the Original Purchaser;
(c) to failure or malfunction of the Oven or any related accessories that is caused by improper use or any 

failure to assemble or install pursuant to factory instructions; to any Oven or related accessories that 

have been materially altered from the condition in which they were shipped to the Original Purchaser;
(e) to any cracking caused by overfiring, by failure to follow a proper curing schedule, or by 

expansion or contraction in either refractory mortar or refractory Oven component;
(f) to normal wear and tear; and,
(g) to freight and shipping charges for sending an Oven to Mugnaini for repair.

All claims under warranty (“Warranty Claim(s)”) must be made within fifteen (15) days after 

occurrence of circumstances giving rise therein and all Warranty Claims must be received 

within the applicable Warranty Period by Mugnaini or its authorized representative.

 Any and 

all rights under this warranty or at law of Original Purchaser against Mugnaini shall terminate and 

be void in the event Warranty Claims are not submitted within the time set forth in the immediately 

preceding sentence. Such Warranty Claims must be in writing and include the Oven type, the 

model and serial number of the Oven, the purchase date and a full description of the circumstances 

giving rise to the Warranty Claim. Warranty Claims under this warranty are to be mailed to:

Summary of Contents for G100 PA





















Reviews: