MTU 20V4000C55, Operating Instructions Manual

Page: 19 / 226

Installing transport locking de-
vice on driving end (KS), variant
A
1. Screw retainer (4) with spacer sleeves (5)
and screws (6) on crankshaft. Spacer
sleeves (5) are optional.
2. Tighten screws (6) to specified tightening torque using a torque wrench.
Name Size Type Lubricant Value/Standard
Screw M16 Tightening torque (Engine oil) 180 Nm +18 Nm
3. Screw nut (3) with washer (2) onto retainer (4). Fit support (1) with washer (7) and nut (8) and tighten nut (8)
with torque wrench to the specified tightening torque.
Name Size Type Lubricant Value/Standard
Nut M24 Tightening torque (Engine oil) 100 Nm +10 Nm
4. Secure with nut (3).
5. Mark the engine as "Fitted with transportation locking device".
Removing transport locking de-
vice on driving end (KS), variant
B
1. Unscrew screw (2) on both sides of the fly-
wheel housing.
2. Unscrew screws (4) on both sides of the fly-
wheel housing and take off washers (5).
3. Remove retainer (3) and threaded bush-
ing (1).
MS15043/00E 2016-04 | Transport | 19
TIM-ID: 0000060211 - 003