MTU 20V4000C55, Operating Instructions Manual

Page: 20 / 226

4. Install guard plate (3) with screws (2) and
spacer sleeves (1) on flywheel housing.
5. Store the removed parts of the transport
locking device carefully for possible reuse.
Installing transport locking device on driving end (KS), variant B
Note: Keep guard plate and screws on the engine. They must be reinstalled when the transport locking device has
been removed.
1. Remove guard plate (3) from flywheel housing.
2. Insert screw (2) in retainer (3), mount thread-
ed bushing (1) and hand-tighten.
3. Install retainer (3) in opening on flywheel
housing on both sides with screw (4) and
washers (5).
Note: Ensure retainer is seated flush (arrow).
4. Tighten screws (4) with torque wrench to specified tightening torque.
Name Size Type Lubricant Value/Standard
Screw M8x25 Tightening torque (Engine oil) 31 Nm +3 Nm
5. Tighten screw (2) on both sides alternately in three steps with torque wrench to specified tightening torque.
Name Size Type Lubricant Value/Standard
Screw M16x160 Preload torque (Engine oil) 15 Nm +2 Nm
Screw M16x160 Residual torque (Engine oil) 30 Nm +3 Nm
Screw M16x160 Tightening torque (Engine oil) 45 Nm +5 Nm
20 | Transport | MS15043/00E 2016-04
TIM-ID: 0000060211 - 003