7.16.4 Drive belt – Replacement
Preconditions
☑
Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Drive belt
(→ Spare Parts Catalog)
Fan drive – Drive belt replace-
ment 16V
1.
Remove protective cover from cooler.
2.
Remove protective grill from fan.
3.
Remove fan.
4.
Loosen securing screws (3).
5.
Screw out screw (2) as far as necessary to
allow drive belt removal.
6.
Check belt pulley on radiator bearing
mount and crankshaft for contamination
and clean if necessary.
7.
Release screws (3) and (4) a little.
8.
Slide tensioning roller over screws (3) and
(4) in direction of arrow until belt is re-
lieved of tension.
Note:
When placing the drive belt in the grooves,
no force must be applied.
9.
Fit new drive belt.
10.
Screw in screw (2) until distance (A) is
100 mm.
11.
Adjust and check drive belt tension
(→ Page 108).
12.
Install fan.
13.
Install protective grill.
14.
Install protective cover.
MS150117/01E 2014-10
| Task Description | 111
TIM-ID: 0000051491 - 002
