Draining residual oil from equip-
ment carrier (only with unsched-
uled engine oil change)
1.
Provide a suitable container in which to col-
lect the engine oil.
2.
Remove drain plug (1) and drain oil (ap-
prox. 7 liters) from oil heat exchanger and
oil filter.
3.
Remove drain screws (2) and (3) and drain
engine oil:
• (2) approx. 12 liters
• (3) approx. 5 liters
4.
Install drain screws(s) with new sealing
ring.
5.
Tighten drain screws (2) and (3) with torque wrench to the specified torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M26 x 1.5 Tightening torque
(Engine oil)
100 Nm +10 Nm
Filling with new engine oil
1.
Open cover (1) on filler neck.
2.
Fill engine oil through filler neck until
“max.” mark on oil dipstick is reached.
3.
Close cover (1) on filler neck.
4.
Check engine oil level (→ Page 88).
5.
Bar engine with starting system
(→ Page 63).
90 | Task Description | MS150026/02E 2013-11
TIM-ID: 0000006152 - 009
