2.
Remove HP fuel line (4).
Note:
While the adapter is removed, the injector
is drained.
3.
Remove adapter (3).
4.
Remove screw (2) and take off hold-down
clamp (1).
5.
Install installation/removal tool on cylinder
head.
6.
Remove injector with installation/removal
tool.
7.
Remove installation/removal tool.
8.
Remove sealing ring (4) from injector or
use a self-made hook to take it out of the
cylinder head.
9.
Remove O-rings (3), O-ring (2) and damper
ring (1) from injector.
10.
Clean all mating and sealing surfaces.
11.
Cover all connections and bores, or seal
with suitable plugs.
MS150026/02E 2013-11
| Task Description | 79
TIM-ID: 0000000925 - 011
