Installing the transport locking
device on driving end (KS), var-
iant B
1.
Secure plate (1) with screws (5) and washers (4) together with cover sheet (7) at the bores on both
sides of the flywheel housing and tighten to the specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M16
Tightening torque
(Engine oil)
250 Nm +25 Nm
2.
Screw locknut (2) onto screws (3) up to the end of the thread.
3.
Fit the retainers (8) through the openings of plate (1) and fasten with screw (3).
4.
Tighten screws (3) alternately with torque wrench to the specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M10
Tightening torque
(Engine oil)
30 Nm +3 Nm
5.
Place locknut (2) of screw (3) in position on plate (1) and lock it.
6.
Fit label (6) to mark the engine as "Fitted with transportation locking device".
10 | Safety | MS150026/02E 2013-11
TIM-ID: 0000047151 - 001