Installing the transport locking
device on driving end (KS), var-
iant A
1.
Screw retainer (4) with spacer sleeves (5)
and screws (6) on crankshaft. Spacer
sleeves (5) are optional.
2.
Use torque wrench to tighten screws (6) to specified tightening torque .
Name
Size
Type
Lubricant
Value/Standard
Screw
M16
Tightening torque
(Engine oil)
160 Nm +16 Nm
3.
Screw nut (3) with washer (2) onto retainer (4). Fit support (1) with washer (7) and nut (8) and tighten
nut (8) with torque wrench to the specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Nut
M24
Tightening torque
(Engine oil)
100 Nm +10 Nm
4.
Secure with nut (3).
5.
Mark the engine as "Fitted with transportation locking device".
Removing the transport locking
device from driving end (KS),
variant B
1.
Release the locknuts (2) on both sides of
the flywheel housing, remove screw (3) and
take off retainer (8).
2.
Remove screws (5) and take off with wash-
ers (4), cover plate (7), label (6) and plates
(1).
3.
Store the removed parts of the transport
locking device together with this documen-
tation carefully for possible reuse.
MS150026/02E 2013-11
| Safety | 9
TIM-ID: 0000047151 - 001
