7.21.6 EMU 8 – Removal and installation
Preconditions
☑
Engine is stopped and starting disabled.
NOTICE
Wrong engine governor installed.
Engine damage!
• When reassembling an engine, make sure that the governor with the data record for the given
engine is installed.
Remove ECU with EMU from en-
gine
1.
Note or mark assignment of cables and
connectors.
2.
Remove all screws (2).
3.
Undo clips (3) on connectors.
4.
Disconnect all connectors.
5.
Remove screws (1).
6.
Remove ECU (1) with EMU (4).
Removing EMU
1.
Unscrew screws on base of EMU (4).
2.
Remove EMU (4) from ECU (1).
Installing EMU
1.
Place EMU (4) on ECU (1).
2.
Screw in and tighten screws on base of EMU (4).
Installing ECU with EMU on engine
1.
Install in reverse order. Ensure correct assignment of plugs and sockets.
2.
Check resilient mount before installing.
Result:
If resilient mount is porous or defective then replace it.
216 | Task Description | MS150045/02E 2013-07
TIM-ID: 0000044017 - 001
