2.
Tighten screws (1) to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Screw
M10x18
Tightening torque
(Engine oil)
20 Nm + 2.5 Nm
3.
Install coolant vent line on compressor housing.
4.
Install intake housing (3) with actuating cyl-
inder (2).
5.
Position clamp (1) and tighten to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Clamp
Tightening torque
15 Nm + 2 Nm
6.
Install oil lines (2). Tighten threaded adapter at actuating cylinder to specified torque using a torque
wrench.
Name
Size
Type
Lubricant
Value/Standard
Threaded adapter
10 G 1/4
A
Tightening torque
(Engine oil)
40 Nm +4 Nm
7.
Install charge-air pipework (1) from exhaust turbocharger to intercooler.
8.
Install air filter (→ Page 173).
9.
Fill with engine coolant (→ Page 194).
170 | Task Description | MS150045/02E 2013-07
TIM-ID: 0000018669 - 006
