7.16.5 Engine coolant – Filling
Preconditions
☑ Engine is stopped and starting disabled.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Engine coolant
WARNING
Coolant is hot and under pressure.
Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.
CAUTION
Cold coolant in hot engine can cause thermal stress.
Formation of cracks in components!
• Fill / top up coolant only into cold engine.
Filling engine coolant
1.
Turn breather valve of filler neck on coolant
expansion tank counterclockwise to first
stop and allow pressure to escape.
2.
Continue to turn breather valve counter‐
clockwise and remove.
3.
Remove plug (required only for first fill).
4.
Pour coolant into engine until coolant level
reaches lower edge of cast-in eye of filler
neck.
5.
Install plug screw.
6.
Check proper condition of breather valve
and clean sealing faces.
7.
Place breather valve on filler neck and
close.
8.
Start the engine and operate it at idle speed
for some minutes.
9.
Check coolant level (→ Page 221).
224 | Task Description | MW15550/06E 2012-02
TIM-ID: 0000006726 - 002
Summary of Contents for 12 V 2000 M50A
Page 21: ...Fuel system covers MW15550 06E 2012 02 General Information 21 TIM ID 0000002178 005 ...
Page 22: ...22 General Information MW15550 06E 2012 02 TIM ID 0000002178 005 ...
Page 23: ...Lube oil system covers MW15550 06E 2012 02 General Information 23 TIM ID 0000002178 005 ...
Page 24: ...24 General Information MW15550 06E 2012 02 TIM ID 0000002178 005 ...