MTS Systems THIR-6780 Series, Configuration Manual

Page: 64 / 96

63
・
Preset Mode 2
This mode would registered the preset data by using the barcode menu or serial commands.
Both for the perfect matching and partial matching are available on data verification.
The preset data can be also stored into the non-volatile memory.
To set Preset Mode 2, scan the symbol (Preset data 2 ) below and follow the procedure below.
Preset Mode 2
Preset data registration
This registration is for complete matches only.
To set the Preset data ,scan the symbol (Set Preset Data ) below, and followed by scanning the adequate
symbols as preset data.
Set Preset Data
Save Settings
(Write into Flash ROM)