MTS Systems THIR-6780 Series, Configuration Manual

Page: 14 / 96

13
・
Symbol Length
To decode symbols with a specific length range for each symbology, this setting must be set through the
serial command DIGIT=ab,c-d[CR] below.
Command Format: DIGIT=ab,c-d[CR]
a = code character A: Code39 C: Code128 d: DataMatrix
e: Composite, RSS E: UPC/JAN/EAN F: Codabar
G: Code93 I: ITF L: PDF417
U: MaxiCode Q: QR Code z: AztecCode
p: Customer Barcode (Japan Post)
b = Minimum length 1~2047
c = Maximum length 1~2047
d= Option CC: Composite Code RSS: GS1 Databar
Note: Other than Code 128, the Minimum / Maximum length includes Stop, Start, and Check Digit
characters.
Note: the Minimum length must be less than the Maximum length.
Example1: Code39, 10 through 20 digits accepted.
DIGIT=A10, 20
Example2: GS1 Databar, 14 through 16 digits accepted.
DIGIT=e14, 16-RSS
For all symbologies, default values are b=1minimum), c=2047(maximum).