MTS Systems THIR-6780 Series, Configuration Manual

Page: 26 / 96

25
Transmit Group Separator [FNC1]
Group Separator [FNC1] may be substituted to another single character. This function is available for
GS-128, GS1 Databar only.
Default Setting Value
：
GS( 0x1D )
Setting Procedure is below to set this single character substituted for Group Separator [FNC1],
[Procedure]
The user has to follow the procedures in order otherwise the setup will be ignored.
1) Review Character Set (refer to
“Character Code” section),
and then confirm upper data and lower data of the singlel character.
2) Scan the
“Setup optional character setting for GS” below.
3) Scan the
“Character Data” symbol corresponding to the upper data from 0 through F..
4) Scan the
“Character Data” symbol corresponding to the lower data from 0 through F..
Setup optional character setting for GS