MTS Systems Bionix, Product Information

Page: 86 / 136

Maintenance
86 MTS Landmark™ Tabletop Load Units - Product Information
Calendar Time using 8 hour
Running Time Rate Per Day
Daily Weekly Biweekly Annually
Running Time-Hours 8 40 80 500 1000 1,500 2,000
Ensure that the lift seal condition is
dry. MTS MTS MTS MTS MTS
Ensure that the lock seal condition is
dry. MTS MTS MTS MTS MTS
Ensure that the crosshead columns
are clean. MTS MTS MTS MTS MTS
Ensure that there are no extreme
column abrasions. MTS MTS MTS MTS MTS
Ensure that the crosshead speed is
appropriate. MTS MTS MTS MTS MTS
Test to ensure the crosshead unlock
causes a program interlock. MTS MTS MTS MTS MTS
Check the condition of all load frame
support airbags and pads. MTS MTS MTS MTS MTS
Ensure that the crosshead
movement is smooth. MTS MTS MTS MTS MTS
Ensure that the hydraulic crosshead
locks are functioning properly. MTS MTS
Bleed the crosshead lift cylinders. MTS MTS
Lubricate the manual crosshead lock
bolts. MTS
Replace the hydraulic lock cap
screws.
1
MTS
Actuator
Complete a cursory check of the
actuator. MTS MTS MTS MTS
Ensure that the actuator area is dry. MTS MTS MTS MTS
Ensure that the actuator platen area
is clean. MTS MTS MTS MTS
1
Replacement of the hydraulic crosshead lock cap screws is recommended every 5 years or 5500 duty
cycles, whichever comes first.