M.T.H. HO Union Pacific Veranda Turbine Diesel Engine
20
DCC “F” FUNCTION LIST
F Key Function
CV Description
(Program On Main, POM Only)
1
Short Address 1-127
3
4
17 & 18
Extended Address (upper bits must be set to 1)
29
Enter 38 to set extended address to engine cab number or
Bits 5 = ext.addr; bit 1 = speed / direction method
49
Short Address (controllers that prohibit addr POM)
50 & 51
Extended Address (controllers that prohibit addr POM)
55
Acceleration Rate 1-25 smph / sec (4 smph / sec is the default)
Deceleration Rate 1-25 smph / sec (4 smph / sec is the default)
Reset - Sends value = 55 to CV55 on address 55 (Do not assign
address 55 to any engine as an engine address)
F0 Headlight (also toggles Ditch Lights)
F1 Bell
F2 Horn
F3 Start-up/Shut-down
F4 PFA
F5 Lights (Ditch and Number Board)
F6 Master Volume
F7 Front Coupler
F8 Rear Coupler
F9 Forward Signal
F10 Reverse Signal
F11 Smoke On/Off
F12 Smoke Volume
F13 Grade Crossing
F14 Coupler Slack
F15 Extended Start-up
F16 Extended Shut-down
F17 Not Used
F19 Engine Sounds (On/Off)
F20 Single Horn Blast
F21 Coupler Close
F22 Feature Reset
F23 Idle Sequence 1
F24 Idle Sequence 2
F25 Idle Sequence 3
F26 One Shot Doppler (On/Off)
F27 Brake Sounds (On/Off)
F28 Cab Chatter (On/Off
F18 Not Used