MTD TPS40-298, Instruction Manual, Page: 26 / 176

Intended use
EN
26
Intended use
This tool is intended solely
- as a pole saw for pruning or cutting back branches
on high trees.
- for use in accordance with the descriptions and
safety instructions given in this operating manual.
The pole saw is not designed for commercial use
and may only be used at home and in the garden.
Any other use is classed as an unintended use.
The user is liable for any damages arising from
unintended use.
Identification plate
Position
The identification plate is located on the casing of
the tool.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Layout
13
12
11
1 2 3 4 5
6 7 8 9 10
1 Motor rotation speed in rpm
2
Power
3
CE mark
4 Disposal note
5 Guaranteed sound level
6
Year of manufacture
7
Degree of protection
8 Weight
9 Rated voltage, current type
10
Model number
11
Serial number
12 Model name
13 Manufacturer
Operating controls
Operating controls
P
1 Battery pack
2
On/off switch on handle
3
Lock-on switch
4 Handle
5 Power pack release
6
Belt attachment
7
Telescopic arm clamping sleeve
8 Telescopic arm
9 Telescopic arm fastening sleeve
10
Oil tank cap
11
Cutting chain
12 Cutting bar
13 Carrying belt
14
Front handle
15
Locking screw
16 Adjusting wheel
17 Oil fill level indicator
18
Protective cover
Start-up
Supplementary documentation
Make sure the operating manuals of the
40V FAST CHARGER and the 40V LI-ION
power pack are available. Please read
and understand them before putting the
device into use.
Power pack charging
WARNING!
Risk of injuries or material damage
¾
Only charge the power pack with the 40V
FAST CHARGER.
Attention!
The power pack is supplied partially charged. Be -
fore first use, fully charge the power pack using the
40 V FAST CHARGER to ensure the full capacity
of the power pack.
Î
Power pack charging must be carried out ac -
cording to the instructions in the supplementary
documentation.