MTD TPS40-298, Instruction Manual, Page: 23 / 176

Safety information
EN
23
Safety information for pole saws
¾
Keep all body parts away from the cutting
tool. Do not attempt to remove cut twigs or
foliage or hold material to be cut when the
chain is running. Only rectify a chain jam
when the tool is switched off. One moment of
inattentiveness when using the device can result
in serious injuries.
¾
Carry the pole saw by the handle with the
chain stationary. Always fit the protective cov -
er when transporting the pole saw or putting
it away for storage. Careful handling of the tool
reduces the risk of injury from the chain.
¾
Only hold the power tool by the insulated han-
dles, because the cutting chain can come into
contact with hidden power cables or even its
own power cable.
Contact of the cutting tool with
a live cable may conduct voltage to metallic tool
components resulting in an electric shock.
¾
Chain and cutting bar form the cutting set.
Only cutting sets approved by the manufac-
turer can be used for a particular tool. Pairing
of components that are not matched to each
other, can result in injuries and irreparable tool
damage. Chains and bars made by different man-
ufacturers must not be combined and used.
¾
Check the tool for damage before every use
or after a shock or impact. The tool must be re-
paired by a specialist workshop before it is placed
in service again.
Protection of yourself and others
¾
Do not let children or persons who have not
read these usage instructions use the device.
The minimum age of users may be defined by
local or national legislation.
¾
Do not operate the device if there are people
(especially children) or animals in immediate
proximity. Ensure children do not play with the
tool.
¾
Stop using the device if persons (especially
children) or animals are nearby.
¾
This device must not be used by children or
persons with reduced physical, sensory or
mental capabilities or with inadequate experi-
ence and knowledge. Likewise persons must
be familiar with this instruction manual before
using the device.
The minimum age for using
the device may be specified by local or national
legislation.
¾
Only switch the motor on if your feet and
hands are at a safe distance from the cutting
element.
¾
Always disconnect the device from the power
supply if you are leaving it unattended or
removing a blockage.
¾
Always wear slip-resistant shoes and long
trousers as well as other appropriate person-
al protective equipment (safety glasses, ear
defenders, safety gloves, safety helmet, etc.)
when working with or on the pole saw. Wear-
ing personal protective equipment reduces the
risk of injuries. Do not wear loose clothing, etc.,
which could be caught by the cutting tool.
Before use
¾
Before use, make sure you are familiar with
the tool, its functions and controls.
¾
Do not use any tool whose switch is defective
and which can no longer be switched on or
off. It must be repaired by a qualified expert or
workshop.
¾
Never use a device with damaged or missing
guards or covers.
They must be repaired or
replaced by a qualified expert or workshop.
¾
Before making adjustments to the device or
cleaning it, switch it off and remove the power
pack.
¾
Ensure that the tool is fully assembled ac-
cording to the instructions.
¾
Check the tool for fault-free operation, espe-
cially that the cutting bar is correctly seated
and the chain correctly tensioned.
Safety information