Vertical Crankshaft Front Tine Tiller
5
3.8.
Remove snap ring that attaches the cable to the
clutch housing.
3.9.
Disconnect the cable from the idler bracket.
See Figure 3.9.
3.10. Install the cable by reversing the order of
removal.
3.11.
To remove the belt
, it will be necessary to
remove the idler bracket
3.12. Disconnect the return spring from the idler
bracket.
3.13. Remove the 3/4 “ hex shoulder bolt and 9/16
lock nut on top side of clutch housing.
See Figure 3.13.
Figure 3.9
Snap ring
Figure 3.13
Shoulder bolt
Idler
return
spring
3.14. Lift the idler bracket and belt out of housing.
3.15. Remove the lock nut from the stud by using a
9/16” wrench. See Figure 3.15.
NOTE:
Belt keeper tabs perform a braking func-
tion when the belt is released.
NOTE:
Belt pt# 754-04061 Use of a non-stan-
dard belt may result in poor performance or loss
of braking feature creating a unsafe condition.
Figure 3.14
Figure 3.15
Belt keeper
tabs
