Vertical Crankshaft Front Tine Tiller
11
5.13. To remove the seals, simply pry them up with a
heavy screw driver.
See Figure 5.13.
NOTE:
Care must be given not to score the
inside of the gear box casting.
5.14. If it is necessary to remove the bushings from
the housing that may be driven-out from the
inside. See Figure 5.14.
NOTE:
The bushing removal tool from the Troy-
Bilt tiller tine shaft tool kit TWX-4006 is the cor-
rect size.
NOTE:
If you see that the bushings are in need
of replacement prior to taking out seals you can
press the seals out at the same time your remov-
ing the bushing
Figure 5.13
Figure 5.14
5.15. When installing new bushings, press them in so
that the end of the bushing is even with the
inside boss of the housing. See Figure 5.15.
NOTE:
Bushing part number 741-04139
NOTE:
If the tiller is need of tine shaft bearings
and the correct bearing (p/n 741-04139) is not
available, Troy-Bilt p/n GW-1086 may be modi-
fied by cutting off
3/8”
for a suitable replace-
ment.
5.16. Scribe the GW-1086 bearing against the driven-
out 741-04139 bearing to mark the length. See
Figure 5.16.
Figure 5.15
Figure 5.16
3/8”
